|
Order
Forms
Printable
Version
|
|
Balancer
Pins |
|
 |
| Balancer
Pins provide exact alignment of the punch holder and the
stripper plate. Optional Flats on the shoulder help prevent
turning when the screw is inserted or removed.
How many are required?
- For maximum alignment and
parallelism, a minimum of four Subliner Pins should be used
for each stripper section in the die. This will minimize
stripper deflection.
- For precision alignment only,
two Subliner Pins and two Balancer Pins are required to
produce the correct stripping action for each spring
stripper section of the die.
|
|
Advantages
- Eliminates need for stripper
bolts and are commonly used to support the die spring.
- Assures parallel alignment of
the stripper plate and the die block when the shoulder of
Subliner / Balancer extends .003/.005 less than the stock
thickness.
- Aligns delicate and
close-fitting punches with stripper plate.
- All critical diameters ground
+/- .0002 and concentric +/- .0002 TIR. Shoulder thickness
+/-.001 and length +/-.002.
- Made of oil hardened tool steel,
through hardened 58-61 RC.
- Available in standard sizes
for greater savings and quicker delivery.
- Made to customer
specifications, (Metric or English).
|
|
