|
T.R.
Jones Die Components
Manufactured exclusively by
Marquardt & Mueller Machining
Phone: 843-466-0656
Fax: 843-466-0759
|
Return |
|
Balancer
Pins |
|
 |
| Balancer
Pins provide exact alignment of the punch holder and the
stripper plate. Optional Flats on the shoulder help
prevent turning when the screw is inserted or
removed.
How many are
required?
- For maximum alignment
and parallelism, a minimum of four Subliner Pins
should be used for each stripper section in the die.
This will minimize stripper deflection.
- For precision
alignment only, two Subliner Pins and two Balancer
Pins are required to produce the correct stripping
action for each spring stripper section of the die.
|
|
Advantages
- Eliminates need for
stripper bolts and are commonly used to support the
die spring.
- Assures parallel
alignment of the stripper plate and the die block
when the shoulder of Subliner / Balancer extends
.003/.005 less than the stock thickness.
- Aligns delicate and
close-fitting punches with stripper plate.
- All critical diameters
ground +/- .0002 and concentric +/- .0002 TIR.
Shoulder thickness +/-.001 and length +/-.002.
- Made of oil hardened tool
steel, through hardened 58-61 RC.
- Available in standard
sizes for greater savings and quicker
delivery.
- Made to customer
specifications, (Metric or English).
|
|
|