|
Basic |
Standard Subliner and Balancer Dimensions |
|||||||||||||
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | |
| 1 | .4375 | .440 | 9/16 | 5/16 | 5/32 | 5/16 | 15/32 | 1/4-20 | 3/4 | 1 | 5/8 | 1/2 | 1/8 | 2-1/2 |
| 2 | .500 | .5025 | 11/16 | 3/8 | 3/16 | 5/16 | 1/2 | 1/4-20 | 1 | 1-1/8 | 11/16 | 1/2 | 3/16 | 3 |
| 3 | .5625 | .565 | 3/4 | 7/!6 | 7/32 | 3/8 | 19/32 | 5/16-18 | 1 | 1-1/8 | 3/4 | 5/8 | 1/4 | 3-1/2 |
| 4 | .625 | .6275 | 13/16 | 1/2 | 1/4 | 3/8 | 5/8 | 3/8-16 | 1 | 1-1/8 | 13/16 | 3/4 | 1/4 | 4 |
| 5 | .750 | .7525 | 15/16 | 1/2 | 1/4 | 7/16 | 11/16 | 3/8-16 | 1 | 1-1/8 | 15/16 | 3/4 | 5/16 | 4-1/2 |
| Specials | To order non-standard pins, indicate BASIC STYLE (based on 'A' Dimension) on the order form below. Use print to indicate ONLY those dimensions which vary from the standard specifications reflected above. | |||||||||||||